show lldp configuration
To display the Link Layer Discovery Protocol (LLDP) configuration, use the show lldp
configuration command in privileged EXEC mode.
Syntax
show lldp configuration [ethernet interface]
•
Interface — Ethernet port
Command Modes
Privileged EXEC
User Guidelines
•
There are no user guidelines for this command.
Example
The following example displays the Link Layer Discovery Protocol (LLDP) configuration
Switch# show lldp configuration
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Port
State
g1
RX, TX
g2
TX
g3
Disabled
show lldp local
To display the Link Layer Discovery Protocol (LLDP) information that is advertised from a specific
port, use the show lldp local command in privileged EXEC mode.
Syntax
show lldp local ethernet interface
•
Interface — Ethernet port
Optional TLVs
PD, SN, SD, SC
PD, SN
Addres
172.16.1.1
172.16.1.1
LLDP Commands
185