Show An Ipv6 Interface - Dell Force10 Z9000 Configuration Manual

Show an IPv6 Interface

View the IPv6 configuration for a specific interface with the following command.
Command Syntax
show ipv6 interface type {slot/
port}
Figure 21-6
| IPv6 Routing
462
Command Mode
EXEC
illustrates the
show ipv6 interface
Purpose
Show the currently running configuration for the
specified interface.
Enter the keyword
interface and slot/port information:
• For all brief summary of IPv6 status and
configuration, enter the keyword
• For all IPv6 configured interfaces, enter the
keyword configured
• For a 10/100/1000 Ethernet interface, enter the
keyword
GigabitEthernet
port information.
• For a Gigabit Ethernet interface, enter the
keyword GigabitEthernet
port information.
• For a 10 Gigabit Ethernet interface, enter the
keyword TenGigabitEthernet
slot/port information.
• For a 40-Gigabit Ethernet interface, enter the
keyword
fortyGigE
information.
• For a loopback interface, enter the keyword
followed by the loopback number.
loopback
• For a linecard interface, enter the keyword
linecard followed by the slot number (Not
available on S4810).
• For a port-channel interface, enter the keyword
port-channel
number.
• For a VLAN interface, enter the keyword
followed by the VLAN ID.
command output.
interface followed by the type of
.
brief
.
followed by the slot/
followed by the slot/
followed by the
followed by the slot/port
followed by the port-channel
vlan