Map 0000: Start Map - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Diagnostics

MAP 0000: Start MAP

This MAP describes initial fault isolation for the Edge Switch 2/24. Fault isolation
begins at the High Availability Fabric Manager (HAFM) server, failed switch,
Internet-connected personal computer (PC) running the Embedded Web Server (EWS)
interface, or attached host.
1
Prior to fault isolation, acquire the following information from the customer:
• A system configuration drawing or planning worksheet that includes the HAFM
server, switch, other HP products, and device connections.
• The location of the HAFM server and all switches.
• The internet protocol (IP) address, gateway address, and subnet mask for the
switch reporting the problem.
• If performing fault isolation using the HAFM server:
•
•
• If performing fault isolation using a customer-supplied server:
•
•
• If performing fault isolation using the EWS interface, the administrator user name
and password. Both are case sensitive and required when prompted at the
Username and Password Required dialog box. (Note: operational status for the
switch can be obtained from the EWS by viewing the Fabric page, Products tab.)
Continue.
2–6
The Windows NT user name and password. These are required when
prompted during any MAP or repair procedure that directs the HAFM
server to be rebooted.
The user name, maintenance password, and HAFM server name. All are
case sensitive and required when prompted at the HAFM Login dialog
box.
The operating system user name and password. These are required
when prompted during any MAP or repair procedure that directs the
server to be rebooted.
The user name, maintenance password, and server name. All are case
sensitive and required when prompted at the HAFM Login dialog box.
edge switch 2/24 service manual