HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 199

Message
Could not export log
to file.
Could not find
firmware file.
Could not remove
dump files from
server.
Could not stop port
diagnostics.
Could not write
firmware to flash.
edge switch 2/24 service manual
Description
A log file I/O error
occurred and the file
could not be saved to
the specified
destination. The disk
may be full or write
protected.
A firmware version
could not be found
because the data
directory structure for
the HAFM server is
corrupt.
Dump files could not
be deleted from the
HAFM server
because the
notebook PC or
Product Manager
application is busy.
Port diagnostics
could not be stopped
by the Product
Manager application
because the Ethernet
link is down or busy,
or because the switch
or director is busy.
A firmware version
could not be written
from the HAFM
server to FLASH
memory on the
switch's CTP2 card.
Action
If the disk is full, use another
disk. If the disk is write
protected, change the
write-protect properties or
use another disk.
Reinstall the HAFM and
Product Manager
applications. If the condition
persists, contact the next level
of support.
Retry the operation later. If
the condition persists, contact
the next level of support.
Retry the operation later. If
the condition persists, contact
the next level of support.
Retry the operation again. If
the condition persists, contact
the next level of support.
Messages
A–29