Diagnostics
Is the Segmentation Reason field blank or does it display an N/A message?
NO
YES
The switch ISL appears operational. Exit MAP.
The Segmentation Reason field displays a reason message.
segmentation reasons and associated steps that describe fault isolation procedures.
Table 2–17: Segmentation Reasons and Actions
Incompatible operating parameters.
Duplicate domain IDs.
Incompatible zoning configurations.
Build fabric protocol error.
No principal switch.
No response from attached switch.
ELP retransmission failure timeout
2–90
Segmentation Reason
Table 2–17
Action
Go to
step
14.
Go to
step
15.
Go to
step
16.
Go to
step
17.
Go to
step
19.
Go to
step
20.
Go to
step
21.
edge switch 2/24 service manual
lists