HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 128

Repair Information
• Date/Time
Date and time stamp for when the alert occurred.
• Name
Name for the alert as configured through the Configure Threshold Alerts dialog
box.
• Port
Port number where the alert occurred.
• Type
The type of alert: transmit (TX) or receive (RX).
• Utilization %
Percent usage of traffic capacity. This is the percent of the port's throughput
capacity achieved by the measured throughput. This setting constitutes the
threshold value and is configured through the Configure Threshold Alerts dialog
box. For example, a value of 25 means that threshold occurs when throughput
reaches 25 percent of the port's capacity.
• Alert Time
The time that the utilization % must exist before an alert is generated. This is set
through the Configure Threshold Alerts dialog box.
• Interval
The time interval during which the throughput is measured and an alert can
generate. This is set through the Configure Threshold Alerts dialog box.
3–12 edge switch 2/24 service manual