Zone Set View - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Diagnostics
Figure 2–16: Zone Set View
e. Inspect zone names in the active zone set to determine the incompatible name.
f. Modify the incompatible zone name as directed by the customer:
1. Click Configure and select Zoning Library. The Zoning Library dialog box
displays.
2. Click the Zones tab.
3. Right click the zone name to be changed and select Rename. The Rename
dialog box displays. Type the new zone name (specified by the customer) and
click OK.
4. Close the Zoning Library dialog box.
5. In the left pane of the Fabric View window, select the fabric containing the
zone name that was changed. Click the Zone Set tab. Verify that the message
area below the Active Zone Set contains the message "The active zone set
does not currently match the configured zone set."
2–86 edge switch 2/24 service manual