HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 88

Diagnostics
Table 2–11: Port Operational and LED States (Continued)
Operational
State
Link Incident
Segmented
E_Port
12
A link incident may have occurred, but the LIN alerts option is not enabled for the port
and the attention indicator does not appear.
At the Hardware View, click Logs and select Link Incident Log. The Link Incident
Log displays. If a link incident occurred, the affected port number is listed with one of
the following messages.
Link interface incident - implicit incident.
Link interface incident - bit-error threshold exceeded.
Link failure - loss of signal or loss of synchronization.
Link failure - not-operational primitive sequence (NOS)
received.
Link failure - primitive sequence timeout.
Link failure - invalid primitive sequence received for the
current link state.
Did one of the listed messages appear in the Link Incident Log?
YES NO
The switch appears operational. Exit MAP.
Go to step 25.
2–68
Green Amber
LED LED
Off Off
On Off
Action
Go to step 25.
MAP 0700.
Go to
edge switch 2/24 service manual