HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 23

Table 2–3: Event Codes versus Maintenance Action (Continued)
Event
Code
070 E_Port is segmented.
071 Switch is isolated.
072 E_Port connected to unsupported switch.
073 Fabric initialization error.
074 ILS frame delivery error threshold
exceeded.
080 Unauthorized worldwide name.
081 Invalid attachment.
120 Error while processing system
management command.
121 Zone set activation failed - zone set too
large.
200 Power supply AC voltage failure.
201 Power supply DC voltage failure.
203 Power supply AC voltage recovery.
204 Power supply DC voltage recovery.
206 Power supply removed.
207 Power supply installed.
300 Cooling fan propeller failed.
301 Cooling fan propeller failed.
302 Cooling fan propeller failed.
303 Cooling fan propeller failed.
304 Cooling fan propeller failed.
305 Cooling fan propeller failed.
310 Cooling fan propeller recovered.
311 Cooling fan propeller recovered.
312 Cooling fan propeller recovered.
edge switch 2/24 service manual
Explanation
Diagnostics
Action
MAP 0700.
Go to
MAP 0700.
Go to
MAP 0700.
Go to
Refer to Collecting
Maintenance Data on page
3–22.
Refer to Collecting
Maintenance Data on page
3–22.
MAP 0600.
Go to
MAP 0600
Go to
MAP 0600
Go to
Reduce size of zone set
and retry.
MAP 0100.
Go to
MAP 0100.
Go to
No action required.
No action required.
Replace FRU.
No action required.
MAP 0500.
Go to
MAP 0500.
Go to
MAP 0500.
Go to
MAP 0500.
Go to
MAP 0500.
Go to
MAP 0500.
Go to
No action required.
No action required.
No action required.
2–3