HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 185

Message
No zone selected or
zone no longer exists.
No zone set active.
No zone set selected.
No zone set selected
or zone set no longer
exists.
Only attached nodes
can be displayed in
this mode.
Password and
confirmation don't
match.
Product manager
instance is currently
open.
edge switch 2/24 service manual
Description
A zoning operation
was attempted
without a zone
selected, or the zone
selected no longer
exists in the fabric.
A zone set cannot be
deactivated if there
are no active zones.
A zoning operation
was attempted
without a zone set
selected.
A zoning operation
was attempted
without a zone set
selected, or the zone
set you selected no
longer exists in the
fabric.
Users cannot display
unused ports when
adding ports by
world-wide name.
Entries in the
password field and
confirmation
password field do not
match. The entries
are case sensitive
and must be the
same.
A product cannot be
deleted while an
instance of the
Product Manager
application is open.
Action
Select a zone and try the
operation again.
Informational message
only-no action is required.
Select a zone set and try the
operation again.
Select a zone set and try the
operation again.
Change the add criteria to
Add by Port.
Enter the password and
confirmation password again.
Close the Product Manager
application, then delete the
product.
Messages
A–15