Diagnostics
f. Type Edge-32 in the Name field. Click OK. The Connect To dialog box displays.
g. Ensure the Connect using field displays COM1 or COM2 (depending on the
serial communication port connection to the switch) and click OK. The COMn
dialog box displays (where n is 1 or 2).
h. Configure the Port Settings parameters as follows:
— Bits per second - 115200.
— Data bits - 8.
— Parity - None.
— Stop bits - 1.
— Flow control - Hardware.
When the parameters are set, click OK. The HyperTerminal window displays.
2–54
115200
edge switch 2/24 service manual