Modify Network Address Dialog Box; Product Delete Confirmation Message - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

8. To change the switch IP address and restart the HAFM server session, go to
10.
9. To restart an HAFM server session using the default IP address of 10.1.1.10:
a. Close the Edge Switch 2/24 Product Manager application and return to the
Products View.
b. The icon representing the reset switch displays a grey square in the
background, indicating switch is not communicating with the HAFM server.
Right-click the icon. A pop-up menu appears.
c. Select the Modify option. The Modify Network Address dialog box
displays.
Figure 3–28: Modify Network Address dialog box
d. Type 10.1.1.10 in the Network Address field and click OK.
Switch-to-HAFM server communication is restored and the procedure is
complete.
10. Change the switch IP address and restart the HAFM server session as follows:
a. Delete the icon representing the reset switch. The icon displays a grey square
in the background, indicating switch is not communicating with the HAFM
server. Right-click the icon. A pop-up menu appears.
b. Select the Delete option. An Product Delete Confirmation message
displays, confirming deletion of the product.
Figure 3–29: Product Delete Confirmation message
c. Click Yes to delete the icon representing the reset switch.
d. Change a switch's IP address through the maintenance port at the rear of the
switch. Refer to the hp StorageWorks edge switch 2/24 installation guide for
information on configuring switch network information.
edge switch 2/24 service manual
Repair Information
step
3–41