Port Segmentation Reasons And Actions - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

6
Inspect the Segmentation Reason field at the Port Properties dialog box.
Table 2–15 lists port segmentation reasons and associated steps that describe fault
isolation procedures.
Table 2–15: Port Segmentation Reasons and Actions
Incompatible operating parameters.
Duplicate domain IDs.
Incompatible zoning configurations.
Build fabric protocol error.
No principal switch.
No response from attached switch.
ELP retransmission failure timeout
7
A minor error occurred that caused fabric services database to be re-initialized to an
empty state. As a result, a disruptive fabric logout and login occurred for all attached
devices. The following list explains the errors.
• Event code 011 - The login server database failed cyclic redundancy check
(CRC) validation.
• Event code 021 - The name server database failed CRC validation.
All attached devices resume operation after fabric login. Perform the data collection
procedure and return the Zip disk to HP for analysis. Exit MAP.
8
A minor error occurred that caused management server database to be re-initialized
to an empty state. As a result, a disruptive server logout and login occurred for all
attached devices. The following list explains the errors.
• Event code 051 - The management server database CRC validation.
• Event code 052 - An internal operating error was detected by the management
server subsystem.
All attached devices resume operation after management server login. Perform the
data collection procedure and return the Zip disk to HP for analysis. Exit MAP.
edge switch 2/24 service manual
Segmentation Reason Action
Go to step 14.
Go to step 15.
Go to step 16.
Go to step 17.
Go to step 19.
Go to step 20.
Go to step 21.
Diagnostics
2–81