HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 198

Messages
Message
Cannot set fibre
channel parameters.
Cannot set write
authorization without
defining a community
name.
Cannot start data
collection.
Cannot start port
diagnostics.
Click OK to remove
all contents from log.
Continuing may
overwrite host
programming.
Continue?
A–28
Description
Fibre Channel
parameters for the
switch or director
cannot be set at the
Product Manager
application because
the Ethernet link is
down or busy.
A community name
was not defined in the
Configure SNMP
dialog box for the
write authorization
selected.
The data collection
procedure cannot be
started by the
Product Manager
application because
the Ethernet link is
down or busy.
Port diagnostics
cannot be started at
the Product Manager
application because
the Ethernet link is
down or busy.
This action deletes all
contents from the
selected log.
Configurations sent
from the host may be
overwritten by the
HAFM application.
Action
Retry the operation later. If
the condition persists, contact
the next level of support.
Enter a community name in
the name field where write
authorization is checked.
Retry the operation later. If
the condition persists, contact
the next level of support.
Retry the operation later. If
the condition persists, contact
the next level of support.
Click OK to delete the log
contents or Cancel to cancel
the operation.
Continuing activates the
current configuration and
overwrites the host
configuration.
edge switch 2/24 service manual