B = Unresponsive node - The attached node did not respond, resulting in a G_Port
ELP timeout. Check the status of the attached device and clean the link's fiber-optic
components (cable and connectors). If the problem persists, contact support personnel
to report the problem.
C = ESA security mismatch - Processing of the Exchange Security Attribute (ESA)
frame detected a security feature mismatch. The fabric binding and switch binding
parameters for this switch and the attached fabric element must agree. Ensure the
parameters for both fabric elements are compatible or disable the fabric and switch
D = Fabric binding mismatch - Fabric binding is enabled and an attached fabric
element has an incompatible fabric membership list. Update the fabric membership list
for both fabric elements to ensure compatibility or disable the fabric binding feature.
E = Authorization failure reject - The fabric element connected to the switch through
an ISL detected a security violation. As a result, the switch received a generic reason
code and set the port to an invalid attachment state. Check the port status of the
attached fabric element and clean the link's fiber-optic components (cable and
connectors). If the problem persists, contact support personnel to report the problem.
F = Unauthorized switch binding WWN - Switch binding is enabled and an attached
device or fabric element has an incompatible switch membership list. Update the switch
membership list for the switch and the attached device or fabric element to ensure
compatibility or disable the switch binding feature.
edge switch 2/24 service manual