Map 0700: Fabric, Isl, And Segmented Port Problem Determination; Map 600: Event Codes - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

MAP 0700: Fabric, ISL, and Segmented Port Problem
Determination
This MAP describes isolation of fabric logout, interswitch link (ISL), and E_Port
segmentation problems. Failure indicators include:
• An event code recorded at the Edge Switch 2/24 Event Log or the EWS Event
Log.
• A segmentation reason associated with a Fibre Channel port at the EWS interface.
• A yellow triangle (attention indicator) appears port graphic or at the alert panel of
the Products View or Hardware View.
• A link incident message recorded in the Link Incident Log or Port Properties
dialog box.
1
Was an event code 011, 021, 051, 052, 061, 062, 063, 070, 071, or 072 observed at
the Edge Switch 2/24 Event Log (HAFM server) or at the EWS Event Log?
YES NO
Go to
2
Table 2–14 lists event codes, brief explanations of the codes, and associated steps
that describe fault isolation procedures.
Table 2–14: MAP 600: Event Codes
Event
Code
011
021
051
052
061
062
063
070
edge switch 2/24 service manual
step 3.
Explanation
Login server database invalid.
Name server database invalid.
Management server database invalid.
Management server internal error.
Fabric controller database invalid.
Maximum interswitch hop count
exceeded.
Received link state record too large.
E_Port is segmented.
Diagnostics
Action
Go to step 7.
Go to step 7.
Go to step 8.
Go to step 8.
Go to step 9.
Go to step 10.
Go to step 11.
Go to step 12.
2–79