Send Firmware Complete Message - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

As the download begins, a Sending Files message displays at the top of the
dialog box. This message remains for a few moments as a progress bar travels
across the dialog box to show percent completion of the download. As the
download progresses, a Writing data to FLASH message displays. This
message remains as the progress bar continues to travel across the dialog box. The
bar progresses to 100% when the last file is transmitted to the CTP card. The
switch then performs an IPL, during which the switch-to-HAFM server link drops
momentarily and the following occur at the Product Manager application:
— As the network connection drops, the Status table turns yellow, the Status
field displays No Link, and the State field displays a reason message.
— The alert panel at the bottom of the navigation control panel displays a grey
square, indicating switch status is unknown.
— Illustrated FRUs in the Hardware View disappear, and appear again as the
connection is re-established.
After the IPL, a Send firmware complete message displays as shown
below.
Figure 3–23: Send Firmware Complete message
9. Click Close to close the dialog box.
10. Click Close to close the Firmware Library dialog box and return to the
Hardware View.
edge switch 2/24 service manual
Repair Information
3–37