Repair Information
Figure 3–5: Link Incident Log
The log contains the following columns:
•
Date/Time - the date and time the link incident occurred.
•
Port - the port number that reported the link incident (0 through 23).
•
Link Incident - a brief description of the link incident. Problem descriptions
include:
— Implicit incident.
— Bit-error threshold exceeded.
— Link failure - loss of signal or loss of synchronization.
— Link failure - not-operational primitive sequence received.
— Link failure - primitive sequence timeout.
— Link failure - invalid primitive sequence received for current link state.
Refer to
MAP 0600: Port Failure and Link Incident Analysis on page 2–64
corrective actions in response to these link incident messages.
3–10
for
edge switch 2/24 service manual