Replacing A Hot-Plug Redundant Power Supply - Compaq ProLiant CL380 User Manual

4-4 Compaq ProLiant CL380 User Guide

Replacing a Hot-Plug Redundant Power Supply

Only the power supplies in the shared storage area are hot-plug and redundant.
If one power supply in the shared storage area fails, the redundant power
supply allows the system to continue operating normally.
IMPORTANT: This procedure can be done with the system powered on.
To replace a power supply in the shared storage area:
1. Open the rear door of the rack to access the back of the system (rack
model only).
2. Open the lever on the cable management arm
of the way (rack model only).

Figure 4-2. Accessing the redundant hot-plug power supplies
and swing the arm out


1
AC T /
LI NK
2
SER VER
NO DE
1
SER VER
NO DE
2