Network and Security Manager Administration Guide
E-mail/SMTP
--recipient
--sender
Syslog
Multiple
--server
No
780
NOTE: You do not specify the SMTP server IP address in the
system uses the IP address configured for e-mail in the Log Actions area of the GUI
Server (in the NSM UI). To configure this IP address, select
the Administer panel of the main configuration tree. Then double-click the server name
on the
GUI Server
panel and enter the
and
Address
To Email Address
this value, see "Exporting to E-mail" on page 772. You must configure the IP address
before attempting to export logs to an e-mail address.
Using E-mail Required and Optional Format-Specific Filters
You can use the following required and optional format-specific filters for exporting to
e-mail:
Multiple
Required
Yes
Yes
No
No
Exporting to syslog
The syslog action directs the system to output logs to a syslog server in syslog format.
You must specify the IP address of the syslog server that receives the exported log records
and the syslog facility.
To export:
Login to the Device Server as root, then change to the utility directory by typing: cd
1.
/usr/netscreen/DevSvr/utils.
To export to a file, type:
2.
sh devSvrCli.sh --log2action --action --syslog <server> <facility
The Device Server exports all log records to the specified IP address for the syslog server.
Using Syslog Required and Optional Format-Specific Filters
You can use the following required format-specific filters for exporting to syslog:
Required
Yes
SMTP Server
IP address, and the
in the
Email Notification
Meaning
Specify the receiving e-mail address for the SMTP log
records
Specify the sender e-mail address
Meaning
Specify syslog server IP address as [IP|FQDN[:<port>]].
Examples:
192.168.1.25:7889
syslog.server@mycompany.com:7889
Copyright © 2010, Juniper Networks, Inc.
log2action
utility. The
Server Manager > Servers
From Email
tab. For details on configuring
in