Exporting And Importing Device Templates; Exporting A Device Template; Importing A Device Template - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Exporting and Importing Device Templates

220
From the Device Manager launchpad, click the Template Operations icon, and select
1.
a device family from the Select OS Name list.
Select one or more devices to remove templates from.
2.
Example:
5gt
Select the Edit icon under the Edit Templates header to display a list of templates.
3.
Select one or more templates to remove.
4.
Example: DNS
Click OK.
5.
Select Remove templates.
6.
Click Apply changes.
7.
Templates can be exported to a text file, and then reimported into another template.
When an exported template is imported into a template, the values in the exported
template overwrite existing values.
The exported template contains only device settings. It does not contain any policies or
objects.

Exporting a Device Template

To export a device template:
From the Device Manager launch pad, select Export/Import, and then select Export
1.
Device Template to File
In the Export Config to File dialog box, select the template you want to export, and
2.
then click OK.
When you see the file generated in the Job Information window, select Save Selected
3.
and give the file a name.
You do not have to highlight the configuration file text. You can use any file extension.

Importing a Device Template

To import device template configurations into a template, follow these steps:
From the Device Manager launch pad, select Export/Import, and then select Import
1.
Device Template Config From File.
Select the templates you want the saved template settings to be applied to.
2.
Select the saved template you want to import.
3.
The settings in the saved template are imported into the NSM template.
Refer to the Network and Security Manager Online Help for detailed procedures.
Copyright © 2010, Juniper Networks, Inc.