Table of Contents
Advertisement
New Features in 2010.2
Copyright © 2010, Juniper Networks, Inc.
of services appears in the
the combined criteria for the search.
If you select
Install On
devices. Check desired devices and click
selection of devices appears in the
Click the
Search
button to execute the search. The
4.
bottom of the dialog box. The applicable search category is listed to the left and the
matching search objects are listed to the right.
Use the buttons above the list of search results to add or search for more results,
5.
edit a result, and delete a result.
Click
Close
to exit the search.
6.
NSM release 2010.2 introduces the following new features and enhancements:
Extension of existing support to JUNOS Release 10.0 and 10.1.
DMI schema support for JUNOS Release 10.2.
Full configuration support for IPv6 on devices running JUNOS Release 10.2—You can
create IPv6 objects in Object Manager, assign IPV6 address objects in Policy Manager,
and view logs with IPv6 addresses for devices running JUNOS Release 10.2.
Virtual chassis representation of SRX clusters—You can manage both devices in an
SRX cluster using a single connection made with the active SRX device in a cluster by
representing the SRX cluster as a virtual chassis in NSM.
Chapter 1: Introduction to Network and Security Manager
box. If you select multiple services, NSM uses
Services
, you can click the
Select Target
to select multiple target devices. Your
OK
box.
Install On
button to view a list of target
Search Results
appear at the
39
Advertisement
Table of Contents
