Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual page 128

Network and Security Manager Administration Guide
Table 16: Predefined NSM Administrator Activities (continued)
Function
Device BGP Operations
Device Certificates
Device Config To/From File
Device Configuration
Device CPU Limit
Device Delta Config
Device Firmware
Device Log Comments
Device Log Flags
Device Logs
Device Passwords
Device Reboot
78
Task Description
N/A Allows you to perform Border Gateway routing Protocol (BGP) operations
on a device, such as connect or disconnect with a neighbor, or test the
TCP connection to a specific neighbor.
Generate and A device certificate authenticates packets passing through a device.
Upload
Get
Delete
Export Allows a system administrator to import a device configuration from a
file or export a device configuration to a file.
Import
View A device configuration is the modeled configuration that exists for a
managed device within NSM.
Update
N/A
View A device delta config is a report that lists the differences between the
device configuration running on the physical device and the modeled
device configuration in NSM.
Update The device firmware is the software image used on the managed device.
Update A device log comment is a user-defined description of a security event
that is recorded in a device log.
Update A device log flag is a visual icon that can be assigned to a device log.
Administrators can assign flags to indicate severity, status, and other
options to a device log.
View A device log records a security event that occurred on a security device.
Hide and Unhide
Purge
Archive
Retrieve
View This activity enables an administrator to view device passwords in
configuration summaries and Job Manager information details.
Note: All passwords handled by NSM are case-sensitive.
Reboot A device reboot is a reboot command sent to a managed device to power
down, and then power up.
Copyright © 2010, Juniper Networks, Inc.