Table of Contents
Advertisement
Network and Security Manager Administration Guide
Viewing Backed up Versions for an SA or IC Device
Setting the RMA State on an SA/IC Device
284
of backup versions for that device is reached, subsequent backup operations
will fail.
Click OK.
4.
To view backed up versions of an SA or IC device:
From the device tree or device list view, right-click on the device and select Backup
1.
Manager. The Backup Manager dialog box appears listing the following information
for all existing backup versions of the device:
Version number of the backup
Date and time when the backup was taken
OS version running on the device when the backup was taken.
Size(in MB) of the data backup.
Name of the NSM admin who took the backup.
Comments that the NSM admin entered while backing up.
Click the Backup button to backup a device. Select a backed up version and click
2.
Restore to restore a backed up version to devices. Select a backed up version and
click Edit Comments to edit the comments associated with a backup. Select a
backed up version and click Delete to delete the backed up version from the NSM
database.
NOTE: The backup and restore feature is available in the NSM UI on root clusters but
not on cluster members. However when the backup/restore operation is performed
NSM automatically chooses one of the cluster members.
If you need to send a device back to the factory and replace it with a new device, you can
set the device to the RMA state. This state allows NSM to retain the device configuration
without a serial number or connection statistics. When you install the replacement device,
all you need to do is activate the device with the serial number of the replacement unit
and do a full restore for the device.
To set the RMA state on an SA/IC device:
From the device tree or device list view, right-click on the device on which you want
1.
to set the RMA state and select RMA Device. The Confirm RMA Device dialog box
appears.
Click OK. The Latest Backup Details dialog box appears. (If you do not have a backup
2.
you will be prompted to take a backup before proceeding with).
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
