Figure 68: Job Information Dialog Box; Reviewing Job Information - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Reviewing Job Information

258
updates. However, if you have not yet performed an update using NSM, the Job List
does not display an Update Configuration directive.
Notification Controls—Enables you to manually view job completion status.
Job Information—Enables you to view job information, including errors, job completion
status, job state, automatic job completion notification setting, and start time of job.
The Job Information dialog box displays the changing device states as the directive is
executed. Device state changes, error messages, and warning messages are displayed
in real time. A sample Job Information dialog box is shown in Figure 68 on page 258.

Figure 68: Job Information Dialog Box

Job Manager tracks the overall progress of one or more jobs executed on a single device.
For multiple device updates, Job Manager tracks the progress of each job on each device
in addition to the overall progress for all devices. To view the Job status for an individual
device (including error messages and percent complete), select the device in the Percent
Complete pane; the status appears in the Output pane.
The Job Information includes:
Job Type—The type of task being tracked. Job Types include Update Device, Reboot
Device, and Config Summary. Job Type is also known as a directive.
Time Stamp—The time at which NSM began executing the directive.
Job Status—The current state of the job.
Number of Jobs Completed—The number of jobs completed out of the total number
of jobs.
Percent Complete—The percentage of total jobs successfully executed. When
performing multiple jobs on multiple devices, this field displays the percentage complete
Copyright © 2010, Juniper Networks, Inc.