Idp Sensors - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
120
The next step is to verify the imported configuration using the Device Monitor or the
Device Manager. See "Verifying Imported Device Configurations" on page 127 for details.

IDP Sensors

IDP Sensors running versions of the IDP software earlier than 4.0 cannot be imported. If
those Sensors are already being managed by IDP Manager, migrate your IDP Management
Server and the Sensors with it. See the IDP-NetScreen-Security Manager Migration Guide
for more information.
You need to upgrade unmanaged Sensors to 4.0 or later before adding them to NSM.
See the IDP Installer's Guide for more information.
To import an IDP 4.0 device with an unknown IP address, follow these steps:
From the domain menu, select the domain in which to import the device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select Device to open the Add Device wizard.
3.
Select Device Is Not Reachable, and then click Next.
4.
Enter the following information on the Specify Name, Color, OS Name, Version, and
5.
Platform screen:
Enter a name and select a color to represent the device in the UI.
From the OS Name list, select ScreenOS/IDP.
From the Platform Name list, select the device type you want to import.
From the OS version list, select the OS version that is running on the device.
Click Next.
6.
On the Specify One Time Password screen:
a. Make a note of the unique external ID for the device. The device administrator
will need it to connect the device to NSM. This ID number represents the device
within the management system. The wizard automatically provides this value.
b. Specify the First Connection One Time Password (OTP) that authenticates the
device.
NOTE: All passwords handled by NSM are case-sensitive.
c. Click Show Device Commands to display the list of CLI commands that must
be executed on the device to connect to NSM. The commands enable
management and set the management IP address to the Device Server IP
address, enable the Management Agent, set the Unique External ID, and set the
device OTP.
Copyright © 2010, Juniper Networks, Inc.