Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
NOTE: An L2TP-only configuration is insecure and is recommended only for debugging.
The remote L2TP clients are on Windows 2000 operating systems. For information on
how to configure L2TP on the remote clients, refer to Windows 2000 documentation.
Only the configuration for the security device end of the L2TP tunnel is provided below.
Configure the user and remote settings objects
Configure an L2TP user object for Adam, then click OK:
1.
For Name, enter Adam.
Select Enable, then select L2TP.
Select Password, then enter and confirm the password: AJbioJ15.
Configure an L2TP user object for Betty, then click OK:
2.
For Name, enter Betty.
Select Enable, then select L2TP.
Select Password, then enter and confirm the password: BviPsoJ1.
Configure an L2TP user object for Carol, then click OK:
3.
For Name, enter Carol.
Select Enable, then select L2TP.
Select Password, then enter and confirm the password: Cs10kdD3.
Create a local user group called Field Sales that includes the Adam, Betty, and Carol
4.
local user objects.
Configure the following, then click OK:
5.
For Name, enter RM_L2TP.
For Color, select green.
For Dns1, enter 1.1.1.2.
For Dns2, enter 1.1.1.3.
For Wins1, enter 0.0.0.0.
For Wins2, enter 0.0.0.0.
Configure the IP Pool object. Configure the following, then click OK:
For IP Pool Name, enter Global.
For Color, select magenta.
Chapter 11: Configuring VPNs
599
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008