Report Types; Predefined Reports; Table 108: Firewall And Vpn Reports - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Report Types

Predefined Reports

Copyright © 2010, Juniper Networks, Inc.
Report Manager contains a set of predefined reports that you can use out of the box. We
recommend that you use the predefined reports. First to familiarize yourself with how
reporting works in NSM. You can then fine tune these reports by generating custom
reports based on the predefined reports.
The predefined reports in Report Manager provide a summary of key log events and
alarms generated by the devices in your network (such as Top Scan Sources or Top
Attacks). Two reports (Logs By User-set Flag and Top Rules) provide administrative
information useful if you are tracking incidents or optimizing your rules. For typical use
cases describing each of these reports, see "Using Reports" on page 799.
Report Manager groups predefined reports into the following categories:
Firewall/VPN Reports on page 785
DI/IDP Reports on page 786
Screen Reports on page 787
Administrative Reports on page 788
UAC Reports on page 788
Profiler Reports on page 789
AVT Reports on page 789
SSL/VPN Reports on page 789
EX Series Switches Report on page 790
Firewall/VPN Reports
Table 108 on page 785 lists and describes reports in NSM that provide information related
to your network's firewalls and VPNs.

Table 108: Firewall and VPN Reports

Report Description
Top Alarms The total number of alarms generated by the managed security devices
in your network, excluding traffic alarms
Top Traffic Alarms The total number of traffic alarms generated by the managed security
devices in your network
Top Traffic Log The total number of traffic log entries generated by the managed
security devices in your network, within filter constraints
Top Configuration Logs The total number of configuration log entries generated by the
managed security devices in your network, within filter constraints
Chapter 19: Reporting
785