Table of Contents
Advertisement
Modeling Many Devices
Using Rapid Deployment
Copyright © 2010, Juniper Networks, Inc.
Click Next. The Add Device wizard validates the CSV file and provides a Validation
5.
Report:
Select Cancel to quit the Add Many Devices process.
Select Add Valid Devices to begin adding the devices for which you have provided
valid device configurations.
The Add Device wizard adds the valid devices and automatically imports their
6.
configurations.
For undeployed devices, you can create device configurations in NSM in a single workflow.
After you have created modeled configurations for each device, you must activate each
device individually.
NOTE: The devices must be running ScreenOS 5.x or a later release.
To model many devices:
From the domain menu, select the domain in which to import the device.
1.
In Device Manager, select Devices.
2.
Click the Add icon, and then select Many Devices. The Add Device wizard appears.
3.
In the Add Device wizard:
4.
Select Model Device.
Specify the location of the CSV file.
Click Next. The Add Device wizard validates the CSV file and provides a Validation
5.
Report:
Select Cancel to quit the Add Many Devices process.
Select Add Valid Devices to begin adding the devices for which you have provided
valid device configurations.
The Add Device wizard adds the valid devices to the NSM UI.
Model the device configuration as desired.
6.
After you have added the device and created modeled device configurations for your
undeployed device, you are ready to activate the device and prompt it to connect to the
management system. After that device has made contact with NSM, you can install the
modeled configuration you created on the physical device. For details on activating a
device, see "Activating a Device" on page 132.
You can model devices, generate configlets, and activate many ScreenOS devices at
one time. Alternatively, you can model multiple devices initially, and then generate
Chapter 4: Adding Devices
177
Advertisement
Table of Contents
