Figure 102: Security Explorer; Security Explorer Main Graph - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Security Explorer Main Graph

706
"Log Viewer" on page 708
"Reports Viewer" on page 708
Figure 102 on page 706 shows the Security Explorer.

Figure 102: Security Explorer

The main component of Security Explorer is a graph that displays the following nodes:
Host—Displayed as an IP address
Network—Displayed using CIDR notation (ip/class: 8/16/24)
Protocol—These include TCP, ICMP, and so on
Attack—Specific attack object name
Service—Displayed in protocol/port notation
Service range—Displayed in protocol/port range notation, for example, TCP/1-1024
Copyright © 2010, Juniper Networks, Inc.