Table 74: Idp Cluster Summary; Viewing Idp Cluster Summary Information - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Viewing IDP Cluster Summary Information

670
Table 73: IDP Cluster Monitor (continued)
Item Description
Domain Domain in NSM in which the source IDP cluster is managed.
Click IDP Cluster Monitor to view a summary of the top-level information on all IDP
clusters. From the IDP Cluster Summary, you can view the following details about a
specific cluster:
Key details describing the cluster (such as name, Status, Cluster ID)
HA mode
Table 74 on page 670 describes all of the information that is available from the IDP Cluster
summary:

Table 74: IDP Cluster Summary

Item Description
Domain Domain in NSM in which the source IDP cluster is managed.
Name Name of the cluster.
Cluster ID Number uniquely identifying a cluster on a given Ethernet segment
(retrieved from all nodes)
HA Mode Whether the Cluster is in Hot-standby or Load-Sharing mode.
Total Members Total number of IDP sensors that are associated with the cluster.
Heartbeat Interval Time interval (in ms) between each heartbeat
Heartbeat Lost Threshold level (number of heartbeat intervals) required to declare that
Threshold a device in the cluster has gone down.
No. of OK Members Number of cluster members that are in OK state.
No. of Failed Members Number of cluster members that are in FAIL state.
No. of Initializing Number of cluster members that are in INIT state.
Member
Master Name of the master node.
Backup Availability Whether a backup is available in the event that the master node goes
down.
No. of Backup Number of active backup devices.
Members
Copyright © 2010, Juniper Networks, Inc.