Table 66: Idp Sensor Process Status Items - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
662
Table 65: IDP Device Detail Status Items (continued)
Item Description
Mode Current operation mode of the device.
CPU Idle Percentage of the time the CPU was idle.
CPU User Percentage of CPU utilization that occurred while executing at the user level.
CPU Kernel Percentage of CPU utilization that occurred while executing at the system
level.
CPU Usage Percentage of CPU utilization.
1 Min. Load One minute load average.
5 Min. Load Five minute load average.
15 Min. Load Fifteen minute load average.
Total Mem Total amount (in megabytes) of memory.
Used Mem Amount (in megabytes) of used memory.
Mem Usage Percentage of used memory.
Total Swap Total amount (in megabytes) of swap space.
Used Swap Amount (in megabytes) of used swap space.
Swap Usage Percentage of used swap space.
Viewing IDP Process Status
For IDP sensors, use the Process Status tab to view information on various processes
running on the sensor.
Table 66 on page 662 lists and describes the information that you can view for an IDP
sensor through the Process Status:

Table 66: IDP Sensor Process Status Items

Item Description
Process Name Name of the process running on the sensor.
Total Mem Usage Amount (in megabytes) of memory used.
Phys Mem Usage Amount of memory (in kilobytes) a process currently has in physical memory
(not in swap).
Copyright © 2010, Juniper Networks, Inc.