Adding The Cluster Members - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Adding the Cluster Members

On the device itself, configure the cluster member device with logon credentials for
1.
the NSM administrator.
Add the cluster member in NSM:
2.
In the Device Manager, right-click on the SA-Cluster icon and select New >
a.
Cluster Member from the list.
In the New Cluster Member dialog box, enter a name and color for the cluster
b.
member and select Device Is Not Reachable.
Click Next. The Specify OS Name, Version, and Platform screen appears.
c.
Specify an IP address for the NSM Device Manager server, or accept the default,
d.
and then click Next.
Make a note of the Unique External ID automatically displayed by NSM. The
e.
device administrator will need it later to connect the device to NSM.
Enter the NSM username and password configured on the device.
f.
Enter a first-connection one-time password, and make a note of it. The device
g.
administrator will need it to connect the device to NSM.
Check the Keep Adding Cluster Members box to add another cluster member.
h.
The Finish button changes to the Next button.
Click Next and repeat the process for the second cluster member. When you
i.
have finished adding cluster members, leave the Keep Adding Cluster Members
box empty and click Finish.
Configure and activate connectivity on each cluster member by performing the
3.
following steps on each cluster member:
Open the System > Configuration > NSM Agent screen to add the NSM
a.
management application.
In the Primary Server field, enter the IP address of the Device Server.
b.
In the Primary Port field, enter 7804.
c.
Fill out the Backup Server and Backup Port fields if a high availability Device
d.
Server is configured.
In the Device ID field, enter the unique external ID provided by the NSM
e.
administrator.
In the HMAC field, enter the one-time password, also provided by the NSM
f.
administrator.
Click the Enable button to enable the NSM agent.
g.
Click Save Changes.
h.
Chapter 4: Adding Devices
159