Comparing Two Versions; Restore An Older Version - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
512
The Version History window appears.
In the Version History window, select an existing version and press Edit Comments.
3.
The Database Version dialog box displays the Version Comments.
Change the comments and click OK.
4.
The Version History window displays the new comments.
When you are finished, click Close.
5.

Comparing Two Versions

This section explains how to compare two existing versions.
When you import a device with assigned policy objects, and there is a difference between
the existing and imported objects, NSM creates a new policy object that has two versions.
The older version being the original and the newer version being the modified object. You
can then use the compare versions tool to find out the changes to the object.
To compare two versions:
In the NSM GUI, right-click on a policy.
1.
In the popup menu, select View Versions.
2.
The Version History window appears.
Select two versions in the window.
3.
Click Compare to view the differences.
4.
When you are finished, click Close.
5.

Restore an Older Version

This section explains how to restore an older version.
To restore am older version:
In the NSM GUI, right-click on a policy.
1.
In the popup menu, select View Versions.
2.
The Version History window appears.
Select an older (non-current) version in the window.
3.
Click Restore to make the selected version current.
4.
The Rollback Security Policy window appears.
Select an earlier version in the window and click Next.
5.
A Diff window appears comparing the old and current version.
View the differences and click Next.
6.
The Object Editor appears.
Make any necessary changes and click Finish.
7.
Copyright © 2010, Juniper Networks, Inc.