Configuring Internal Av Profiles - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
372

Configuring Internal AV Profiles

Internal AV profiles allow you to set AV settings for multiple devices via a policy. NSM
comes with a predefined AV profile, or you can create your own.
Viewing a Predefined Profile on page 372
Creating Custom AV Profiles on page 372
Configuring Extension Lists on page 373
Viewing a Predefined Profile
To view the predefined AV profile, select Object Manager > AV Objects > Internal >
Predefined Profiles. Select the predefined profile, then click the Edit button. You cannot
make changes to the profile.
Creating Custom AV Profiles
To create a custom AV profile, select
> >
Internal Predefined Profiles/Custom Profiles
Populate the fields of the New Internal Antivirus Profile dialog:
General information—Assign a name and color to the profile, and enter a comment
describing the purpose of the profile.
For each protocol type, check the Enable check box to enable scanning for that protocol,
then set the following settings for each enabled protocol:
Scan Mode: All, Intelligent, or by File Extension. If you select Scan by File Extension,
you must populate the Ext List Include field.
Scanning Timeout: Scans that take longer than this time out and are not completed.
Decompress Layer: The number of levels of decompression to perform before
scanning. A decompression setting of 2 would all the scanning of a .zip file within a
.zip file.
Skip Mime (HTTP only): If checked, causes the scanner to skip any mime types listed
in the Mime List field.
Ext List Include: A list of file extensions to examine for viruses. Extension lists are
created under Object Manager > AV Objects > Extension Lists.
Ext List Exclude: A list of file extensions to not examine for viruses. Extension lists
are created under Object Manager > AV Objects > Extension Lists.
Mime List (HTTP only): The list of mime types to not scan. NSM ships with a default
mime type list, or you can create your own under Object Manager > AV Objects >
Custom Mime Lists.
Email Notify Virus Sender (IMAP, POP3, SMTP only): Notifies an e-mail sender if a
virus was found in the e-mail.
> >
Object Manager UTM ScreenOS
. Click the Add button.
Copyright © 2010, Juniper Networks, Inc.
>
AV Objects