Figure 114: Audit Log Viewer Ui Overview; Table 106: Audit Log Information - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Audit Log Table

Table 106: Audit Log Information

Column Description
Time Generated The time the object was changed. The Audit Log Viewer displays log entries in order of time generated
by Greenwich Mean Time (GMT).
Admin Name The name of the NSM administrator who changed the object.
Admin Login Domain The name of the domain (global or subdomain) that contains the changed object.
Working Domain The domains from which a user is allowed to view audit logs. The values are:
Command The command applied to the object or system, for example,
Authorization Status The final access-control status of activities is either success or failure.
Copyright © 2010, Juniper Networks, Inc.

Figure 114: Audit Log Viewer UI Overview

NOTE: Summaries appear in the Target Name or Device Name tables only for logs with
targets or devices.
The audit log table contains the columns of information shown in Table 106 on page 763.
— Audit-log entries created prior to this NSM release that do not have targeted objects or
empty
devices. These logs can be viewed by all NSM users.
— Audit-log entries for all managed devices associated with a subdomain. Users of
Subdomain
the subdomain or global domain can view these audit-log entries.
— Audit-log entries generated by the system. These audit-log entries can be viewed by
SYSTEM
all NSM users.
— Audit-log entries from the global domain. Users of the global domain can view all audit-log
global
entries.
Chapter 18: Logging
or .
sys_logout modify
763