Linking To A Third-Party Host Checker Policy Shared Object; Uploading A Secure Virtual Workspace Wallpaper Image - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
Importing a Secure Virtual Workspace Wallpaper Image (Secure Access Devices Only)
280
NOTE: After you upload a Host Checker policy package to the NSM shared object, you
cannot modify the package contents. Instead, you must modify the package on your
local system and then upload the modified version to NSM.
Implement the policy at the realm, role, or resource policy level using the options
4.
described in the Secure Access Administration Guide or the Unified Access Control
Administration Guide section about configuring host checker restrictions.
To verify that the package itself is installed and running on the client computer, you
can use the name you specified when you uploaded the policy package (for example,
myPestPatrol ). To enforce a particular policy in the package, use the syntax
package-name.policy-name
package, use
myPestPatrol

Linking to a Third-Party Host Checker Policy Shared Object

To create a link from a Secure Access or Infranet Controller device configuration tree to
a shared object containing a third-party host checker policy, follow these steps:
In the Device Manager, double-click the Secure Access or Infranet Controller device
1.
to open the device editor, and then select the Configuration tab.
Expand Authentication.
2.
Select Endpoint Security.
3.
From the Host Checker tab, select the Settings tab, and then click the Add icon in
4.
the Policies box.
From the Policy type list, select 3rd Party Policy.
5.
Give the policy a name.
6.
Select a shared binary data object from the Package list.
7.
Click OK to save the configuration.
8.
These files are generated by the system administrator.

Uploading a Secure Virtual Workspace Wallpaper Image

Upload the original generated file, and create a shared object for it.
Linking to a Secure Virtual Workspace Wallpaper Image Shared Object
To create a link from a Secure Access device configuration tree to a shared object
containing a secure virtual workspace wallpaper image, follow these steps:
In the Device Manager, double-click the Secure Access device to open the device
1.
editor, and then select the Configuration tab.
Expand Authentication.
2.
Select Endpoint Security.
3.
. For example, to enforce the
.
myPestPatrol.FileCheck
Copyright © 2010, Juniper Networks, Inc.
policy in the
FileCheck