Fails; Option; But Has No Admin Privileges; Adding Vsys Devices - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Table of Contents

Advertisement

Network and Security Manager Administration Guide

Adding Vsys Devices

146
Example: User Selects Two Devices with Delta Option and One Device Fails
In the main navigation tree, select Device Manager > Devices.
1.
From the Device Manager launchpad, select Update Device to open the Update
2.
Device(s) dialog box, listing all connected and managed devices.
Select two devices you want to update.
3.
Select Run Summarize Delta Config (if deselected), and then click Apply Changes.
4.
NSM displays the delta configuration results. One device succeeded and the other
device failed.
Click Update.
5.
Close the Job Information window and select Job Manager from the main navigation
6.
tree.
Only the device that passed delta configuration is updated.
Example: User Selects Two Devices to Update Without the Delta Option
In the main navigation tree, select Device Manager > Devices.
1.
From the Device Manager launchpad, select Update Device to open the Update
2.
Device(s) dialog box, listing all connected and managed devices.
Select two devices you want to update.
3.
Deselect Run Summarize Delta Config (if selected), and then click Apply Changes.
4.
NSM displays the updated device job results for both devices.
Example: User Selects Two Devices to Update with the Delta Option, But Has no
Admin Privileges
In the main navigation tree, select Device Manager > Devices.
1.
From the Device Manager launchpad, select Update Device to open the Update
2.
Device(s) dialog box, listing all connected and managed devices.
Select two devices you want to update.
3.
Select Run Summarize Delta Config (if deselected), and then click Apply Changes.
4.
NSM displays the delta configuration results for both devices.
A Virtual System (vsys) is a virtual device that exists within a physical security device.
The vsys device functions as a completely separate security device. The physical device,
called the root device, can contain multiple vsys devices. The following Juniper Networks
security devices can be root devices:
NetScreen-500
ISG1000
ISG2000
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.2

Table of Contents