Figure 11: Selecting The Gui Server In Central Manager - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Table of Contents

Advertisement

Network and Security Manager Administration Guide
58
To add an informational banner:
In the Administer panel of the main navigation tree, select Server Manager > Servers.
1.
Select the GUI server to which you want to add the banner server-wide, and click
2.
the Edit icon, as shown in Figure 11 on page 58.

Figure 11: Selecting the GUI Server in Central Manager

Enter the customized text in the Log In Warning Message text box, and then click
3.
OK, as shown in Figure 12 on page 59.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.2

Table of Contents