Table 69: Nsrp Device Summary; Viewing Vsd/Rto Information - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Viewing VSD/RTO Information

Copyright © 2010, Juniper Networks, Inc.
Key details describing the cluster (such as name, number of VSDs, and number of
RTOs)
Security details
The total number and type of events
Table 69 on page 667 describes all of the information that is available from the NSRP
summary:

Table 69: NSRP Device Summary

Item Description
Cluster Name of this cluster.
Domain Domain in NSM in which the NSRP device is managed.
No of VSD's The total number of virtual security devices (VSDs) that are attached
to this cluster.
No of RTO's The total number of runtime objects (RTOs) that are attached to this
cluster.
Encryption Whether encryption has been enabled or disabled.
Authentication Whether authentication has been enabled or disabled.
No. of Gratuitous arps The number of gratuitous ARPs.
Critical Events The total number of Critical events that occurred.
Major Events The total number of Major events that occurred.
Minor Events The total number of Minor events that occurred.
Warning Events The total number of Warning events that occurred.
Intermediate Events The total number of Intermediate events that occurred.
Clear Events The total number of Clear events that occurred.
Double-click the cluster security device icon or click the + icon that corresponds to the
cluster security device icon to view the virtual security devices (VSD) and runtime objects
(RTO) that have been attached to this cluster.
Click the VSD or RTO icon to see summary information describing the object. Table 70
on page 668 describes the information available from the VSD/RTO summary:
Chapter 16: Realtime Monitoring
667