Table of Contents
Advertisement
Network and Security Manager Administration Guide
Configuring SCTP Objects
Configuring an SCTP Object
Configuring Authentication Servers
392
NOTE: You cannot delete a predefined service object.
Click Finish.
5.
With Stream Control Transmission Protocol (SCTP), you can transmit data in messages
to the SCTP transport layer. Various protocols including IUA, SUA, M2UA, M3UA, H.248,
and DIAMETER, can run on SCTP. You can control the protocols used with the SCTP
protocol filtering tool. After you configure an SCTP object, you can apply it to various
policies.
Select
Object Manager
1.
add, edit, delete or search for an SCTP object using the icons in the task bar at the
upper left of the window.
Click the
icon. A
2.
New (+)
Enter a name for the object in the
3.
Check the appropriate boxes to drop payload-protocols.
4.
Check the appropriate boxes to drop m3ua-services.
5.
Click
.
OK
6.
An authentication server provides authentication services for NSM administrators and
remote access services (RAS) users on your network. The information stored in an
authentication server determines the privileges of each administrator.
When the security device receives a connection request that requires authentication
verification, the device requests an authentication check from the external auth server
specified in the policy, L2TP tunnel configuration, or IKE gateway configuration. The
device then acts as a relay between the user requesting authentication and the
authentication server granting authentication.
In NSM, an auth server is an object used in security policies, IKE gateways, and L2TP
tunnels. Each security device includes a default authentication server; however, to enable
an external RADIUS, SecureID, or LDAP server to provide authentication, you must
configure an external authentication server object. You can also configure a RADIUS
authentication server object to provide authentication for the global domain and each
subdomain. For information about configuring a RADIUS server, see "Configuring a RADIUS
Authentication Server" on page 395.
>
. The
SCTP Objects
SCTP Objects
New SCTP Object window
Name
field.
window opens. You can
opens.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
