Figure 29: Trust-Untrust-Dmz Port Mode Bindings; Figure 30: Extended Port-Mode Interface To Zone Bindings; Table 19: Extended Bindings - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Table of Contents

Advertisement

Network and Security Manager Administration Guide
108

Figure 29: Trust-Untrust-DMZ Port Mode Bindings

This mode provides the following bindings:
Binds the Ethernet ports 1 and 2 to the ethernet1 interface, which is bound to the Trust
security zone.
Binds the Ethernet ports 3 and 4 to the ethernet2 interface, which is bound to the DMZ
security zone.
Binds the Untrusted Ethernet port to the ethernet3 interface, which is bound to the
Untrust security zone.
Binds the Modem port to the serial interface, which you can bind as a backup interface
to the Untrust security zone.
Trust/Untrust/DMZ (Extended) Mode
Trust/Untrust/DMZ (Extended) mode binds interfaces to the Untrust, Trust, and DMZ
security zones, allowing you to segregate web, email, or other application servers from
the internal network. See Figure 30 on page 108.

Figure 30: Extended Port-Mode Interface to Zone Bindings

Table 19 on page 108 provides the Extended mode interface-to-zone bindings.

Table 19: Extended Bindings

Port
Interface
Untrusted
Untrust
Zone
Untrust
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.2

Table of Contents