Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual page 826

Network and Security Manager Administration Guide
Table 107: Common Filters (continued)
Option Default
--user-flag yes
--action yes
776
Multiple Specifies
yes User flag number
no Action, usually followed
by format-specify filters
Some common filters support multiple entries, enabling you to specify more than one
criteria. When using multiple entries for a common filter, you must use the common filter
before each entry.
NOTE: Use the help command to print all relevant filter options:
sh devSvrCli.sh --help
Example: Specifying a Common Filter with Multiple Entries
To set a filter that displays all log entries for IDP and EX Series devices, type:
./devSvrCli.sh --log2action --filter --device-family idp,junos-ex --action --csv --file-path
/tmp/moon.csv --include-header no
In the following example, a common filter option is specified to view logs based on the
category option. To set a filter that displays log entries that indicate an implicit rule was
matched or a configuration change occurred on the device, type:
./devSvrCli.sh --log2action --filter --category implicit,config --action --csv --file-path /tmp/sun.csv
--include-header no
NOTE: When a filter option includes multiple entries, use a comma-separated list with
no space between the entries, as shown in the preceding example.
Format
<[0-7]>
High = 0
Medium = 1
Low = 2
Closed = 3
False Positive = 4
Assigned = 5
Investigate = 6
Follow-Up = 7
Pending = 8
<action>
(csv, e-mail, script, snmp, sylog, xml)
Copyright © 2010, Juniper Networks, Inc.