Figure 70: Viewing The Device Inventory; Comparing And Reconciling Device Inventory - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Comparing and Reconciling Device Inventory

Copyright © 2010, Juniper Networks, Inc.
In the navigation tree, select Device Manager > Devices.
1.
Right-click the device whose inventory you want to view.
2.
Select View/Reconcile Inventory.
3.
The Device Inventory window opens, similar to the example shown in Figure 70 on
page 271.

Figure 70: Viewing the Device Inventory

Select the Hardware tab to display information about hardware modules in the
4.
device, including the I/O module, the Routing Engine, and so on.
Select the Software tab to display information about the software packages installed
5.
in the device, including the installed OS and its version, and any other installed
packages.
Select the License tab to display the license usage summary and details of each
6.
installed license.
The usage summary lists the features that are licensed, the capacity of each license
(for example, how many VPNs a license supports), how many licensed units are
already in use, and how many more are needed.
The license details include the key, name, or ID of the license, the date the license
was created, and the validity status of the license.
Changes to the device inventory are not automatically updated in the NSM database.
The device does not notify NSM of such changes. If a hardware module is added, removed,
or replaced, the software is upgraded through the device CLI or Web UI, a new software
package is installed, or a new license key is added, the NSM database becomes out of
sync with the device inventory.
Run the Inventory Diff tool to check for differences between the NSM database and the
device inventory. To run this tool, follow these steps:
In the Device Manager, select Devices, and then right-click on the device you want
1.
to compare.
Select View/Reconcile Inventory.
2.
Chapter 7: Managing Devices
271