Monitoring Rsvp-Te Profiles And Mpls Tunnel Profiles; Table 52: Show Mpls Phb-Id Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

standard
standard
Table 52 on page 353 lists the show mpls phb-id command output fields.
Meaning

Table 52: show mpls phb-id Output Fields

Related Topics

Monitoring RSVP-TE Profiles and MPLS Tunnel Profiles

Display a specific RSVP-TE or tunnel profile, or all RSVP-TE or tunnel profiles.
Purpose
To display the default RSVP-TE profile:
Action
host1:pe2#show mpls rsvp profile default
RSVP profile default: used by 0 interfaces
To display all MPLS tunnel profiles:
host1#show mpls tunnels profile
MPLS Tunnel Profile tunnelProfile
Table 53 on page 354 lists the show mpls profile command output fields.
Meaning
phb-id 7 traffic-class
phb-id 10 traffic-class
Field Name Field Description
phb-id Per-hop behavior ID for which a traffic class/color combination is
displayed
traffic-class Traffic class associated with traffic
color Color (drop precedence) associated with traffic, green, yellow, or
red
show mpls phb-id
refresh period: 30000 ms
timeout factor: 3
LSP setup using rsvp-te
tunnel not announced to any IGP
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is route
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is no route
metric is relative 0
path option 2
path to be dynamically calculated by isis
destinations include: 1.1.1.1 2.2.2.2 3.3.3.3
ISIS Level 2 routers
OSPF border routers
7
5
Monitoring RSVP-TE Profiles and MPLS Tunnel Profiles
Chapter 4: Monitoring MPLS
color n/a
color n/a
353