NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual page 124

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Interface
Current
Configured
Tagging
6-12
Valid slot and port number separated by forward slashes. It is
possible to set the parameters for all ports by using the selec-
tors on the top line.
Determines the degree of participation of this port in this
VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q stan-
dard.
Autodetect - Specifies to allow the port to be dynamically
registered in this VLAN via GVRP. The port will not partici-
pate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE
802.1Q standard.
Determines the configured degree of participation of this port
in this VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q stan-
dard.
Autodetect - Specifies to allow the port to be dynamically
registered in this VLAN via GVRP. The port will not partici-
pate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE
802.1Q standard.
Select the tagging behavior for this port in this VLAN.
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
Untagged - specifies to transmit traffic for this VLAN as
untagged frames.
v4.1, October 2008
VLAN Commands