NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual page 182

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Authentication
Flag
Link Up/Down
Flag
Multiple Users
Flag
Spanning Tree
Flag
Broadcast Storm
Flag
DVMRP Traps
OSPF Traps
PIM Traps
10-12
Can be enabled or disabled. The factory default is enabled.
Indicates whether authentication failure traps will be sent.
Can be enabled or disabled. The factory default is enabled.
Indicates whether link status traps will be sent.
Can be enabled or disabled. The factory default is enabled.
Indicates whether a trap will be sent when the same user ID is
logged into the switch more than once at the same time
(either via telnet or serial port).
Can be enabled or disabled. The factory default is enabled.
Indicates whether spanning tree traps will be sent.
Can be enabled or disabled. The factory default is enabled.
Indicates whether broadcast storm traps will be sent.
Can be enabled or disabled. The factory default is disabled.
Indicates whether DVMRP traps will be sent.
Can be enabled or disabled. The factory default is disabled.
Indicates whether OSPF traps will be sent.
Can be enabled or disabled. The factory default is disabled.
Indicates whether PIM traps are sent.
v4.1, October 2008
SNMP Commands