Logout; Ping - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Table 19-1. Copy Parameters (continued)
Source
<url>
<url>
<url>
<url>
<url>

19.2.11 logout

This command closes the current telnet connection or resets the current serial connection.
Note: Save configuration changes before logging out.
Format
Mode

19.2.12 ping

This command checks if another computer is on the network and listens for connections.
To use this command, configure the switch for network (in-band) connection. The source
and target devices must have the ping utility enabled and running on top of TCP/IP. You
can ping the switch from any IP workstation the switch is connected to through the default
VLAN (VLAN 1), as long as there is a physical path between the switch and the
workstation. The terminal interface sends three pings to the target station.
Format
Modes
System Maintenance Commands
Destination
nvram:sslpemserver
nvram:sslpemdhweak
nvram:sslpemdhstron
g
nvram:startup-config
system:image
logout
Privileged EXEC
ping <ipaddr>
Privileged EXEC, User EXEC
v4.1, October 2008
Description
Downloads an HTTP secure-server
certificate.
Downloads an HTTP secure-server
certificate.
Downloads an HTTP secure-server
certificate.
Downloads the startup configuration
file to the system.
Downloads a code image to the
system.
19-21