NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual page 277

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Authentication
Failure
IP TTL errors
Zero Priority
Packets
Received
Zero Priority
Packets Sent
Invalid Type
Packets
Received
Address List
Errors
Invalid
Authentication
Type
Authentication
Type Mismatch
Packet Length
Errors
Routing Commands
Represents the total number of VRRP packets received that
don't pass the authentication check.
Represents the total number of VRRP packets received by the
virtual router with IP TTL (time to live) not equal to 255.
Represents the total number of VRRP packets received by
virtual router with a priority of '0'.
Represents the total number of VRRP packets sent by the vir-
tual router with a priority of '0'.
Represents the total number of VRRP packets received by the
virtual router with invalid 'type' field.
Represents the total number of VRRP packets received for
which address list does not match the locally configured list
for the virtual router.
Represents the total number of VRRP packets received with
unknown authentication type.
Represents the total number of VRRP advertisements
received for which 'auth type' not equal to locally configured
one for this virtual router.
Represents the total number of VRRP packets received with
packet length less than length of VRRP header.
v4.1, October 2008
14-23