Entering Cli Commands - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Table 2-6. CLI Mode Access and Exit (continued)
Command Mode
Policy-Map
Config
Policy-Class-Map
Config
Class-Map
Config
Tacacs
Config
MAC Access-list
Config
DHCP Pool
Config
Stack Global
Config Mode

2.2.6 Entering CLI Commands

The 7300S Series Stackable Switch supports several features to help you enter commands.
2.2.6.1 Command Completion and Abbreviation
Command completion finishes spelling the command when you type enough letters of a
command to uniquely identify the command keyword. Once you have entered enough
letters, press the SPACEBAR or TAB key to complete the word.
Command abbreviation allows you to execute a command when you type enough letters of
a command to uniquely identify the command. You must enter all of the required
keywords and parameters before you enter the command.
2-8
Access Method
From the Global Config mode, enter
policy-map.
From the Policy Map mode enter
class.
From the Global Config mode, enter
class-map.
From the Global Config mode, enter
tacacs-server host <ip-
address|hostname>.
From the Global Config mode enter
mac access-list extended
<name>.
From the Global Config mode, enter
ip dhcp pool <name>.
From the Global Config mode, enter the
stack command.
v4.1, October 2008
Exit or Access Previous Mode
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Policy Map mode, enter
Privileged
exit. To return to the
EXEC
mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter the exit command. To return
to the Privileged EXEC mode, enter
Ctrl-Z.
Overview